The Ultimate Guide To Termite Control Procedure

Facts About Termite Control Process Uncovered


Mud tubesUnlike ants, termites do not ramble around on the soil surface or outside in the open. They will either tunnel through the soil or into timber (or other stuff ) or else travel inside pencil-size (or bigger )"sand tubes" that they assemble from soil, wood contaminants and other materials. You'll find these tubes on foundation walls, floor joists or different parts of the house.

The 15-Second Trick For Termite Control ProcessThe 10-Minute Rule for Termite Control Process
Break open the tubes to see if termites continue to be active. An empty tube doesn't necessarily mean that termites are gone; they might have just abandoned this particular tunnel. Termites often rebuild damaged tubes, which is another indication of current action. 'Old' tubes are dry and crumble easily, leaving behind"etching" on the surface which could be visible for years (an indication that a home had termite activity at any time).

Tubes which are found on ceilings or on top levels of a building may indicate that you have an aboveground ("aerial") infestation, i.e., the termite colony actually lives in the building and the termites are traveling up from the soil. Mud tubes constructed through an aboveground colony usually contain materials other than soil, e.g., wood and sheet rock or whatever the termites are feeding on.

The Best Strategy To Use For Termite Control ProcedureLittle Known Questions About Termite Control Products.

Not known Details About Termite Control Products


In such situations, a thorough inspection may require elimination of siding or interior wallboards, etc.. More importantly for you, these aboveground infestations cannot be controlled using the usual soil treatment (see below) and are generally deducted from a termite contract warranty. In such situations, finding and correcting the moisture problem is the first step to eliminating the termites. .

We tend to think of termites as feeding/injuring timber only. Termites actually feed on virtually anything that contains cellulose, the main component of wood, including wood paneling, paper products, cardboard boxes, art canvases, the paper covering of sheet rock, carpeting, etc.. While foraging and feeding, they could tunnel through non-cellulosic substances, such as plastic and foamboard.

Top Guidelines Of Termite Control Procedure


In fact, the amount of damage that termites cause depends on many aspects. In regions with cold winter temperatures, termite activity (and feeding) often declines, but does not necessarily stop. If the termites are well-protected from colder temperatures (e.g., underneath a slab), then activity may continue year-round. From a practical standpoint, severe termite damage generally takes about 3-8 years. .

There is no accurate method for determining the era of recently discovered harm. You need some reference point, i.e., some point in time when it was known that there was no harm to this specific wood. This can be one reason why annual inspections (and keeping your records of those inspections) are important. .

NOTE: These inspections are not a guarantee that you do not have termites or harm in areas which are not insured or not readily seen, such as inside walls. On the other hand, the inspections can reveal conditions that may imply that damage does exist and additional investigation is needed.

In case you've got a termite protection contract, contact the pest control company immediately and arrange for them to check out the problem. Should you not own a termite contract, call 2-3 (or more) companies and have every one inspect your home and offer you the details of their findings and any recommendations for a plan of action to fix any termite conditions they found.

The 7-Minute Rule for Termite Control Process


Termites do not cause significant damage in a short period of time, so spending a few extra days or even a few weeks will not make any actual difference in terms just how much damage happens. .

Can there be harm That Needs to Be repaired or examined by a contractor or engineer before control measures are performed

Simply spraying swarmers or the surface of available infested wood can kill the termites which you see now, but it does not block the infestation nor does it shield your read this article house from future attacks by termites. The most common sort of termite treatment involves a"trench and cure" in which a liquid insecticide ("termiticide") is placed on the soil surrounding crucial areas of your house.

Termite Control Process Fundamentals Explained


The dirt is trenched 6" deep and about 4-6" wide. For homes with crawlspaces, the soil along the interior foundation wall has to be treated within 4 ft of identified signs of termite activity. In some cases, the soil around supports (such as piers) underneath the home are also treated.

When implemented correctly, this treatment forms a continuous chemical barrier which should prevent termites from reaching the foundation and piers in your residence. .

Concrete slabs that attach to the home, for instance, a garage floor, or the slab of an earth-filled porch.

Leave a Reply

Your email address will not be published. Required fields are marked *